Golf Mechanix
Sold out
Deep Throat Club Length Ruler with Lie Angle Gauge
Add to Compare
$450.00
?Reference? Club Length RulerThe Auditor Reference is ruler that?s specifically designed to handle the length of difficult-to-measure clubs where by the head, shaft and or grip do not lie on the same reference plane such as when:i-The clubhead back of...
A090715
CLUBMAKING
Golf Mechanix
?Reference? Club Length RulerThe Auditor Reference is ruler that?s specifically designed to handle the length of difficult-to-measure clubs where by the head,...
Title
*
Sold out
Cutter Checker for R&A/USGA Conforming Grooves
Add to Compare
$1,975.20
A groove cutter checker designed around a small industrial grade microscope fitted with good optics capable of magnifying the cutter 20 times over. The blade is mounted in the spring loaded chuck which positions the blade flat in relation to...
A070920
CLUBMAKING
Golf Mechanix
A groove cutter checker designed around a small industrial grade microscope fitted with good optics capable of magnifying the cutter 20 times...
Title
*
Sold out
Contour Tracer Club Head Vise
Add to Compare
$2,368.80
Built to the specifications of the R&A and refined by Golfmechanix, this adjustable vise is used to mount irons and drivers under the stylus of a contour tracer with good positioning accuracy with respect to groove alignment and face flatness,...
A070930
CLUBMAKING
Golf Mechanix
Built to the specifications of the R&A and refined by Golfmechanix, this adjustable vise is used to mount irons and drivers under...
Title
*
Sold out
Groove Scan Casting Kit
Add to Compare
$1,045.20
The Groove Scan Casting kit manufactured by Golfmechanix is based on the original kit designed and engineered by the USGA for casting a mirror image of the club-head groove in a two step process. The cast is then sliced and...
A070910
CLUBMAKING
Golf Mechanix
The Groove Scan Casting kit manufactured by Golfmechanix is based on the original kit designed and engineered by the USGA for casting...
Title
*
Sold out
Ultra High Speed Groove Scanner
Add to Compare
$63,000.00
A one of a kind instrument developed as a proof of concept that demonstrates the suitability of micron level, high speed laser scanning technology's ability to capture a groove?s profile so that it can be measured and analysed to determine...
A070900
CLUBMAKING
Golf Mechanix
A one of a kind instrument developed as a proof of concept that demonstrates the suitability of micron level, high speed laser...
Title
*
Sold out
Hi Impact Resistant Lie Angle Fit Board 19x8 Inch
Add to Compare
$132.60
A lie angle fitting board specially designed for the retail fitting environment where the use of new demo clubs is prevalent. This Lexan board does not transfer burn marks to the club-head, and the low profile, rigid and impact resistant...
A160420-19
CLUBMAKING
Golf Mechanix
A lie angle fitting board specially designed for the retail fitting environment where the use of new demo clubs is prevalent. This...
Title
*
Sold out
R&A Golf Grip Scanner
Add to Compare
$44,496.00
Digitized grip contour lines captured using the high resolution laser are formatted using a 3D data matrix and stored as a native DXF file which can be manipulated using standard cad software and regenerated as a 3D wire mesh which...
A070800
CLUBMAKING
Golf Mechanix
Digitized grip contour lines captured using the high resolution laser are formatted using a 3D data matrix and stored as a native...
Title
*
Sold out
Dynamic Lie Fitting Impact Board 20x12 Inch
Add to Compare
$29.70
This Lexan board does not transfer burn marks to the club-head, and the low profile, rigid and impact resistant surface ensures that avid golfers can't bury the club in it! Best used with impact transfer tape or similar is recommended.A...
A160415
CLUBMAKING
Golf Mechanix
This Lexan board does not transfer burn marks to the club-head, and the low profile, rigid and impact resistant surface ensures that...
Title
*
Sold out
Golf Clubhead CG Marker
Add to Compare
$95.40
The Club-head Center of Gravity (CG) locator can be used to locate the center of gravity position of woods, irons and putters on the vertical plane (face) and horizontal plane (sole) of the clubhead, both of which are very strong...
A070400
CLUBMAKING
Golf Mechanix
The Club-head Center of Gravity (CG) locator can be used to locate the center of gravity position of woods, irons and putters...
Title
*
Sold out
Putter Length Fit Assist Mirror
Add to Compare
$134.40
Putter fitting MirrorThe putter fitting mirror is a tried and true method that gets golfers to set up correctly and naturally for the putting stroke. This in turn helps the fitter determine the best lie and length combination for the...
A160301
CLUBMAKING
Golf Mechanix
Putter fitting MirrorThe putter fitting mirror is a tried and true method that gets golfers to set up correctly and naturally for...
Title
*
Sold out
AUDiTOR Flex Finder
Add to Compare
$83.25
Weighing just under an ounce; This original device clamps just under the grip. It doesn't contribute much to the MOI of the club or alter the feel or swing characteristic in any significant way.How it works:Â When the club-head is leading...
A160190
CLUBMAKING
Golf Mechanix
Weighing just under an ounce; This original device clamps just under the grip. It doesn't contribute much to the MOI of the...
Title
*
Sold out
Trajectory Fitting Software (300500 CD)
Add to Compare
$166.95
The software can determine the best club head speed, head weight, COR, launch angle, shaft bending angle and attack angle to help a clubmaker make informed fitting decisions.The Auditor Speed Check measures club head Speed and ball speed, which data...
A160130P
CLUBMAKING
Golf Mechanix
The software can determine the best club head speed, head weight, COR, launch angle, shaft bending angle and attack angle to help...
Title
*
Sold out
Precision Golf Club Head CG Locator
Add to Compare
$15,175.80
The Auditor Golf Club Head CG locator CGL was the first commercially available instrument club-head designers and engineers could buy off the shelf to make their design work progress reliably and at a much faster pace. Today, the Auditor CGL...
A070500
CLUBMAKING
Golf Mechanix
The Auditor Golf Club Head CG locator CGL was the first commercially available instrument club-head designers and engineers could buy off the...
Title
*
Sold out
Auditor Swing Speed and Ball Speed Meter
Add to Compare
$278.40
The Auditor Speed Check is a small, compact and reliable optical velocity sensor that provides Swing speed, Tempo and Ball speed data, all essential golf club fitting parameters.Key Features: Measures club-head or ball speed in m/s or Mph. Measures up...
A160130
CLUBMAKING
Golf Mechanix
The Auditor Speed Check is a small, compact and reliable optical velocity sensor that provides Swing speed, Tempo and Ball speed data,...
Title
*
Sold out
Adjustable Loft - Lie and Length Fitting Putter
Add to Compare
$436.20
A golf club loft angle and lie angle are very important attributes. Golfers can benefit from getting this checked and adjusted if necessary. The golf club manufacturers have slight variances of what constitutes a ?standard? loft and lie angle for...
A160200-32
CLUBMAKING
Golf Mechanix
A golf club loft angle and lie angle are very important attributes. Golfers can benefit from getting this checked and adjusted if...
Title
*
Double Bend Shaft Putter Bending Bar
Add to Compare
$159.00
A Bending bar suitable for changing the loft and lie on single and double bend putter shafts. This design has a 2.5 inch cantilevered guided sheave arrangement which provides accurate alignment and better bend transition in the bending plane.A bending...
A150832
CLUBMAKING
Golf Mechanix
A Bending bar suitable for changing the loft and lie on single and double bend putter shafts. This design has a 2.5...
Title
*