1770 x 320px
Products
.335 .350 and .370 Manual Straight Fluted Reamer Set
Add to Compare
$157.20
Drill Press Operation:While specifically designed for hand reaming operations, both reamers (straight & fluted) can be used on a drill press running at 150 RPM or below. Slow cutting speed combined with a moderate feed speed and generous lubrication yields...
A190010
CLUBMAKING
Golf Mechanix
Drill Press Operation:While specifically designed for hand reaming operations, both reamers (straight & fluted) can be used on a drill press running...
Title
*
.335 Clubhead Setup Shaft to Head Connector for R&A/USGA Test Pendulum
Add to Compare
$144.00
Designed for speed and convenience for either production or lab use, this setup shaft to head connector allow operators to test several clubheads of the same design, eliminating the nee to re-adjust the back clamp each time a new head...
A070600-A335
CLUBMAKING
Golf Mechanix
Designed for speed and convenience for either production or lab use, this setup shaft to head connector allow operators to test several...
Title
*
.335 Cobalt Steel Drill Bit
Add to Compare
$64.20
Produced to GolfMechanix exacting standards, for re-boring hosels on clubheads made of notoriously difficult to drill metals such as 17-4PH, titanium and marraging steel.These HSS-Co alloyed and Titanium nitrated twist drills hold their rigidity and hardness at higher temperatures better...
A190030-335
CLUBMAKING
Golf Mechanix
Produced to GolfMechanix exacting standards, for re-boring hosels on clubheads made of notoriously difficult to drill metals such as 17-4PH, titanium and...
Title
*
.335 Head to Shaft Connector for R&A/USGA Test Pendulum. Single
Add to Compare
$74.40
This Head-to-shaft connector is specifically designed for use with the R&A/USGA CT testing pendulum. Shaft end will take either .335 Steel or Graphite shaft.
A070600-S335
CLUBMAKING
Golf Mechanix
This Head-to-shaft connector is specifically designed for use with the R&A/USGA CT testing pendulum. Shaft end will take either .335 Steel or...
Title
*
.335 Manual Spiral Fluted Hand Reamer
Add to Compare
$71.40
These manual Spiral fluted reamers are excellent for finishing and reconditioning hosel bores to a high degree of accuracy and surface finish.
A190020-335
CLUBMAKING
Golf Mechanix
These manual Spiral fluted reamers are excellent for finishing and reconditioning hosel bores to a high degree of accuracy and surface finish.
Title
*
.335 Manual Straight Fluted Reamer
Add to Compare
$58.80
These manual Spiral fluted reamers are excellent for finishing and reconditioning hosel bores to a high degree of accuracy and surface finish.
A190010-335
CLUBMAKING
Golf Mechanix
These manual Spiral fluted reamers are excellent for finishing and reconditioning hosel bores to a high degree of accuracy and surface finish.
Title
*
.350 Cobalt Steel Drill Bit
Add to Compare
$64.20
Produced to GolfMechanix exacting standards, for re-boring hosels on clubheads made of notoriously difficult to drill metals such as 17-4PH, titanium and marraging steel.These HSS-Co alloyed and Titanium nitrated twist drills hold their rigidity and hardness at higher temperatures better...
A190030-350
CLUBMAKING
Golf Mechanix
Produced to GolfMechanix exacting standards, for re-boring hosels on clubheads made of notoriously difficult to drill metals such as 17-4PH, titanium and...
Title
*
.350 Head to Shaft Connector for R&A/USGA Test Pendulum. Single
Add to Compare
$74.40
This Head-to-shaft connector is specifically designed for use with the R&A/USGA CT testing pendulum. Shaft end will take either .335 Steel or Graphite shaft.
A070600-S350
CLUBMAKING
Golf Mechanix
This Head-to-shaft connector is specifically designed for use with the R&A/USGA CT testing pendulum. Shaft end will take either .335 Steel or...
Title
*
.350 Manual Spiral Fluted Hand Reamer
Add to Compare
$71.40
These manual Spiral fluted reamers are excellent for finishing and reconditioning hosel bores to a high degree of accuracy and surface finish.
A190020-350
CLUBMAKING
Golf Mechanix
These manual Spiral fluted reamers are excellent for finishing and reconditioning hosel bores to a high degree of accuracy and surface finish.
Title
*
.350 Manual Straight Fluted Reamer
Add to Compare
$58.80
Excellent for finishing and re-conditionning hosel bores for re-shafting purposes. Finishes bores to a high degree of accuracy and surface finish.These GolfMechanix Straight Fluted Hand Reamers are made to exacting specifications and will provide an ideal allowance between shaft and...
A190010-350
CLUBMAKING
Golf Mechanix
Excellent for finishing and re-conditionning hosel bores for re-shafting purposes. Finishes bores to a high degree of accuracy and surface finish.These GolfMechanix...
Title
*
.355 Manual Spiral Fluted and Tapered Hosel Reamer
Add to Compare
$73.80
These manual Spiral fluted reamers are excellent for finishing and reconditioning hosel bores to a high degree of accuracy and surface finish.
A190020-355
CLUBMAKING
Golf Mechanix
These manual Spiral fluted reamers are excellent for finishing and reconditioning hosel bores to a high degree of accuracy and surface finish.
Title
*
.355 Manual Straight Fluted Tapered Hosel Reamer
Add to Compare
$87.00
These manual Spiral fluted reamers are excellent for finishing and reconditioning hosel bores to a high degree of accuracy and surface finish.
A190010-355
CLUBMAKING
Golf Mechanix
These manual Spiral fluted reamers are excellent for finishing and reconditioning hosel bores to a high degree of accuracy and surface finish.
Title
*
.370 Clubhead Setup Shaft to Head Connector for R&A/USGA Test Pendulum
Add to Compare
$144.00
Designed for speed and convenience for either production or lab use, this setup shaft to head connector allow operators to test several clubheads of the same design, eliminating the nee to re-adjust the back clamp each time a new head...
A070600-A370
CLUBMAKING
Golf Mechanix
Designed for speed and convenience for either production or lab use, this setup shaft to head connector allow operators to test several...
Title
*
.370 Cobalt Steel Drill Bit
Add to Compare
$64.20
Produced to GolfMechanix exacting standards, for re-boring hosels on clubheads made of notoriously difficult to drill metals such as 17-4PH, titanium and marraging steel.These HSS-Co alloyed and Titanium nitrated twist drills hold their rigidity and hardness at higher temperatures better...
A190030-370
CLUBMAKING
Golf Mechanix
Produced to GolfMechanix exacting standards, for re-boring hosels on clubheads made of notoriously difficult to drill metals such as 17-4PH, titanium and...
Title
*
.370 Head to Shaft Connector for R&A/USGA Test Pendulum. Single
Add to Compare
$74.40
This Head-to-shaft connector is specifically designed for use with the R&A/USGA CT testing pendulum. Shaft end will take either .335 Steel or Graphite shaft.
A070600-S370
CLUBMAKING
Golf Mechanix
This Head-to-shaft connector is specifically designed for use with the R&A/USGA CT testing pendulum. Shaft end will take either .335 Steel or...
Title
*
.370 Manual Spiral Fluted Hand Reamer
Add to Compare
$71.40
These manual Spiral fluted reamers are excellent for finishing and reconditioning hosel bores to a high degree of accuracy and surface finish.
A190020-370
CLUBMAKING
Golf Mechanix
These manual Spiral fluted reamers are excellent for finishing and reconditioning hosel bores to a high degree of accuracy and surface finish.
Title
*