Golf Mechanix
.335 .350 and .370 Manual Straight Fluted Reamer Set
Add to Compare
$157.20
Drill Press Operation:While specifically designed for hand reaming operations, both reamers (straight & fluted) can be used on a drill press running at 150 RPM or below. Slow cutting speed combined with a moderate feed speed and generous lubrication yields...
A190010
CLUBMAKING
Golf Mechanix
Drill Press Operation:While specifically designed for hand reaming operations, both reamers (straight & fluted) can be used on a drill press running...
Title
*
Sold out
Transformer Universal Portable Gripping Stand
Add to Compare
$607.20
 Key Features: Portable and easy to assemble. Easy to configure bolt on accessories. Compatible with all our gripping modules. Tray, side rack and floor matt included. Measures 100 x 95 x 40 cm (39 x 37 x 16 .in). We've...
A100011
CLUBMAKING
Golf Mechanix
 Key Features: Portable and easy to assemble. Easy to configure bolt on accessories. Compatible with all our gripping modules. Tray, side rack...
Title
*
Metal Reinforced Rubber Clamp
Add to Compare
$26.40
Tough on the outside and gentle on the inside. This original design featuring the Golfmechanix ?Power Rib? has been emulated by many for its ability to constrict a shaft without crushing it when over tightening the vise. Performs better and...
A170720
CLUBMAKING
Golf Mechanix
Tough on the outside and gentle on the inside. This original design featuring the Golfmechanix ?Power Rib? has been emulated by many...
Title
*
.370 Cobalt Steel Drill Bit
Add to Compare
$64.20
Produced to GolfMechanix exacting standards, for re-boring hosels on clubheads made of notoriously difficult to drill metals such as 17-4PH, titanium and marraging steel.These HSS-Co alloyed and Titanium nitrated twist drills hold their rigidity and hardness at higher temperatures better...
A190030-370
CLUBMAKING
Golf Mechanix
Produced to GolfMechanix exacting standards, for re-boring hosels on clubheads made of notoriously difficult to drill metals such as 17-4PH, titanium and...
Title
*
.350 Cobalt Steel Drill Bit
Add to Compare
$64.20
Produced to GolfMechanix exacting standards, for re-boring hosels on clubheads made of notoriously difficult to drill metals such as 17-4PH, titanium and marraging steel.These HSS-Co alloyed and Titanium nitrated twist drills hold their rigidity and hardness at higher temperatures better...
A190030-350
CLUBMAKING
Golf Mechanix
Produced to GolfMechanix exacting standards, for re-boring hosels on clubheads made of notoriously difficult to drill metals such as 17-4PH, titanium and...
Title
*
.335 Cobalt Steel Drill Bit
Add to Compare
$64.20
Produced to GolfMechanix exacting standards, for re-boring hosels on clubheads made of notoriously difficult to drill metals such as 17-4PH, titanium and marraging steel.These HSS-Co alloyed and Titanium nitrated twist drills hold their rigidity and hardness at higher temperatures better...
A190030-335
CLUBMAKING
Golf Mechanix
Produced to GolfMechanix exacting standards, for re-boring hosels on clubheads made of notoriously difficult to drill metals such as 17-4PH, titanium and...
Title
*
.350 Manual Spiral Fluted Hand Reamer
Add to Compare
$71.40
These manual Spiral fluted reamers are excellent for finishing and reconditioning hosel bores to a high degree of accuracy and surface finish.
A190020-350
CLUBMAKING
Golf Mechanix
These manual Spiral fluted reamers are excellent for finishing and reconditioning hosel bores to a high degree of accuracy and surface finish.
Title
*
.335 Manual Spiral Fluted Hand Reamer
Add to Compare
$71.40
These manual Spiral fluted reamers are excellent for finishing and reconditioning hosel bores to a high degree of accuracy and surface finish.
A190020-335
CLUBMAKING
Golf Mechanix
These manual Spiral fluted reamers are excellent for finishing and reconditioning hosel bores to a high degree of accuracy and surface finish.
Title
*
Small Aluminum Shaft Clamp
Add to Compare
$48.00
A heavy-duty, low profile shaft clamp specifically designed for shaft removal and coring out tip weights stack inside the shaft. Supporting the shaft tip while drilling prevents the tip from splitting open. Assorted hole sizes fit standard tip shafts. Features...
A170500
CLUBMAKING
Golf Mechanix
A heavy-duty, low profile shaft clamp specifically designed for shaft removal and coring out tip weights stack inside the shaft. Supporting the...
Title
*
Rubber Vise Pad
Add to Compare
$33.00
Soft Rubber Shaft ClampVulcanized, non-marring rubber pads are great for clamping club-heads in a vice. These rubber vice pads are also suitable for clamping golf shafts when held in the moulded V-groove. Sold as a pair.Vulcanized non-marring rubber pads used...
A170400
CLUBMAKING
Golf Mechanix
Soft Rubber Shaft ClampVulcanized, non-marring rubber pads are great for clamping club-heads in a vice. These rubber vice pads are also suitable...
Title
*
Ratchet Vise Clamp
Add to Compare
$266.40
A handy ratchet vice clamp which automatically adjusts to any size shaft and pressure level thanks to a ?Jam Cam? machined from Heat treated High Speed Steel to minimize wear and tear from repeated clamping action.Key Features: Jam Cam design...
A170800
CLUBMAKING
Golf Mechanix
A handy ratchet vice clamp which automatically adjusts to any size shaft and pressure level thanks to a ?Jam Cam? machined from...
Title
*
Club Length Ruler with RH-LH Lie Angle Soling Plate
Add to Compare
$398.40
?Standard? Club Length RulerThis ruler?s advantage over the described method is that the ruler is set flat over a bench, with the club centred against a lie angle gauge hinged exactly at the intersection of the shaft centreline and sole...
A090721
CLUBMAKING
Golf Mechanix
?Standard? Club Length RulerThis ruler?s advantage over the described method is that the ruler is set flat over a bench, with the...
Title
*
Grip Sizer
Add to Compare
$26.40
This a custom golf club fitting tool designed for selecting the proper grip size for any golfer. The tool measures finger length and palm size which are then cross reference to a specific grip size and a recommended range of...
A160900
CLUBMAKING
Golf Mechanix
This a custom golf club fitting tool designed for selecting the proper grip size for any golfer. The tool measures finger length...
Title
*
Portable Heavy Duty Bending Stand (Silver)
Add to Compare
$606.00
This free standing heavy duty bending stand can be moved around the workshop and out of the way when not needed. This stand only requires the clubmaker to leverage the bending effort by standing on the platform. This stand can...
A150760
CLUBMAKING
Golf Mechanix
This free standing heavy duty bending stand can be moved around the workshop and out of the way when not needed. This...
Title
*
Grip and Shaft Dimensioning Combination Gauge
Add to Compare
$90.60
Machined from heavy gauge aluminium and CNC engraved over a black anodized surface.This versatile gauge will measure grip size and butt end of shafts on both men?s and ladies? clubs, including undersized, standard and oversized. Easily measures right-handed and left-hand...
A060200
CLUBMAKING
Golf Mechanix
Machined from heavy gauge aluminium and CNC engraved over a black anodized surface.This versatile gauge will measure grip size and butt end...
Title
*
Manual Shaft Spine Finder
Add to Compare
$159.00
The Manual Shaft Spine Finder provides a quick and accurate method for locating the neutral bending axis on a golf shaft. This ensures the correct shaft to head alignment which helps improve impact feel consistency while minimizing shot dispersion.This spine...
A050010
CLUBMAKING
Golf Mechanix
The Manual Shaft Spine Finder provides a quick and accurate method for locating the neutral bending axis on a golf shaft. This...
Title
*