CLUBMAKING
Sold out
Universal Ferrule Turning Arm
Add to Compare
$137.40
A ferrule turning arm designed around 42" belt sanders. This design allows the pod to rotate 30 degrees around its base and has up to 4 inches of reach back and forth. This makes for a very comfortable position from...
A130601
CLUBMAKING
Golf Mechanix
A ferrule turning arm designed around 42" belt sanders. This design allows the pod to rotate 30 degrees around its base and...
Title
*
Sold out
Ferrule Finishing and Shaft Tip Preparation Tool
Add to Compare
$79.80
The Ferrule & Shaft Finnish tool can be vise or bench mounted. Comes with a plastic squirt bottle, 3 pieces of Lint Free Strips (SP-G0501-01) and 3 strips of 80 Grit Sand Paper (SP-G0402-02).This unique dual purpose tool is used...
A130500
CLUBMAKING
Golf Mechanix
The Ferrule & Shaft Finnish tool can be vise or bench mounted. Comes with a plastic squirt bottle, 3 pieces of Lint...
Title
*
Sold out
Ferrule Trimmer
Add to Compare
$47.25
This tool works like a lathe. The club is secured in a V nest with the blade overlapping the ferrule and shaft. The club is spun by hand clockwise against the blade, shaving a thin layer of material with each...
A130300
CLUBMAKING
Golf Mechanix
This tool works like a lathe. The club is secured in a V nest with the blade overlapping the ferrule and shaft....
Title
*
Sold out
Semi Automatic Pneumatic Ferrule Installer
Add to Compare
$5,006.40
Key Features: Batch install ferrules effortlessly Millimetric control over insertion depth 1/2? Step shaft span locator Rated pneumatic cylinder -Pneumatic Shaft restricter Pinch free spring loaded ferrule rider Air pressure regulator Joy stick control Bench mount setup Woods & irons...
A130900
CLUBMAKING
Golf Mechanix
Key Features: Batch install ferrules effortlessly Millimetric control over insertion depth 1/2? Step shaft span locator Rated pneumatic cylinder -Pneumatic Shaft restricter...
Title
*
Shaft and Ferrule Prepping Machine with Flap Wheel 240V
Add to Compare
$919.80
Specifications: 42? belt X 1.25 inch width feed 1800 ft/minute. CE and UL approved 1/3 Hp 1720 RPM brushless induction motor 115~120 Volts 60 Hz. Dust sealed and fitted with On / Off switch, 8 amp safety fuse, 6 ft...
A130631-240V
CLUBMAKING
Golf Mechanix
Specifications: 42? belt X 1.25 inch width feed 1800 ft/minute. CE and UL approved 1/3 Hp 1720 RPM brushless induction motor 115~120...
Title
*
Sold out
Epoxy Curing System 240V
Add to Compare
$1,326.00
ELECTRIC EPOXY CURE SYSTEMHeat is transferred progressively and evenly from the pegs to the clubhead hosel via conduction. Radiated heat from the pegs is not damaging to adjacent surfaces and does not blister paint, weaken shafts or embrittle shaft adapters,...
A200310-240V
CLUBMAKING
Golf Mechanix
ELECTRIC EPOXY CURE SYSTEMHeat is transferred progressively and evenly from the pegs to the clubhead hosel via conduction. Radiated heat from the...
Title
*
Sold out
Epoxy Curing System
Add to Compare
$1,325.40
Heat is transferred progressively and evenly from the pegs to the clubhead hosel via conduction. Radiated heat from the peg is not damaging to adjacent surfaces and does not blister paint, weaken shafts or embrittle shaft adapters.The upright curing position...
A200310
CLUBMAKING
Golf Mechanix
Heat is transferred progressively and evenly from the pegs to the clubhead hosel via conduction. Radiated heat from the peg is not...
Title
*
Sold out
Programmable Epoxy Cure System 3 240V
Add to Compare
$1,342.20
EPOXY CURING SYSTEM 3 Compact with Digital Temperature Controller & RecorderSufficient for 3 clubs, this unit heats faster and is more responsive because of the smaller thermal load and higher power density available at the pegs. Temperature rise, soak time...
A200323-240V
CLUBMAKING
Golf Mechanix
EPOXY CURING SYSTEM 3 Compact with Digital Temperature Controller & RecorderSufficient for 3 clubs, this unit heats faster and is more responsive...
Title
*
Sold out
Programmable Epoxy Cure System 3
Add to Compare
$1,342.20
With just 3 heating pegs, this unit heats faster and is more responsive because of the smaller thermal load and higher power density available. Temperature rise and soak time at target temperature are controlled by the Auditor Omega proportional controller...
A200323
CLUBMAKING
Golf Mechanix
With just 3 heating pegs, this unit heats faster and is more responsive because of the smaller thermal load and higher power...
Title
*
Sold out
Programmable Epoxy Cure System 7 240V
Add to Compare
$1,881.00
EPOXY CURING SYSTEM 7 with Digital Temperature Controller & RecorderBuilt around our original fast cure epoxy cure system the Auditor Omega proportional Engine has a two stage, temperature controlled, time dependant firing rate, that brings the common rail curing rack...
A200320-240V
CLUBMAKING
Golf Mechanix
EPOXY CURING SYSTEM 7 with Digital Temperature Controller & RecorderBuilt around our original fast cure epoxy cure system the Auditor Omega proportional...
Title
*
Sold out
Scoreline Regrooving Tool
Add to Compare
$92.40
The original re-grooving tool designed for shaping the grooves on non conforming irons and wedges, restoring worn out grooves in accordance to the rules of golf as set by the R&A and USGA. Unlike cheap "copy cat" versions of our...
A190700
CLUBMAKING
Golf Mechanix
The original re-grooving tool designed for shaping the grooves on non conforming irons and wedges, restoring worn out grooves in accordance to...
Title
*
Sold out
Shaft Tip Abrader
Add to Compare
$61.20
The answer to abrading graphite shaft tips. Just a few turns and the coating is fully removed for a proper shaft bond. Special wound coil stainless steel wire brush and compression nut compensate for wear. One size fits all shaft...
A190200
CLUBMAKING
Golf Mechanix
The answer to abrading graphite shaft tips. Just a few turns and the coating is fully removed for a proper shaft bond....
Title
*
Sold out
Compact Heavy Duty Shaft Preping Center 240V
Add to Compare
$741.60
A Golfmechanix original design, this unit is powered by a heavy duty industrial motor integrated into one highly functional workstation that can handle all of your shaft & ferrule prepping needs.The powerful ? Hp 3,400 RPM motor provides ample power...
A130647-240V
CLUBMAKING
Golf Mechanix
A Golfmechanix original design, this unit is powered by a heavy duty industrial motor integrated into one highly functional workstation that can...
Title
*
Sold out
Compact Heavy Duty Shaft Preping Center
Add to Compare
$741.60
The spring tensionned 1"x42" belt sander track can be mounted with a variety of high performance belts such as Trizact & Norax belts for safely prepping graphite shafts, putting a good coarse finish on steel shafts or a shiny luster...
A130647
CLUBMAKING
Golf Mechanix
The spring tensionned 1"x42" belt sander track can be mounted with a variety of high performance belts such as Trizact & Norax...
Title
*
Shaft Cutting Fixture
Add to Compare
$54.00
SHAFT ANGLE MITER GUIDEThe Shaft Angle Miter Guide has been designed to help clubmakers measure and repeat angle cuts to golf shaft tips. USING THE SHAFT ANGLE MITER GUIDE Step-1Secure the Shaft Angle Miter Guide into a bench vice.Step-2Insert the...
A120020
CLUBMAKING
Golf Mechanix
SHAFT ANGLE MITER GUIDEThe Shaft Angle Miter Guide has been designed to help clubmakers measure and repeat angle cuts to golf shaft...
Title
*
Compact Shaft Cutter and Ferrule Prepping Center 240V
Add to Compare
$720.00
The GolfMechanix Compact Shaft Cutter & Ferrule Prepping Center is the ideal tool for the small workshop and the occasional clubmaker. It provides enough power to cut through steel and graphite shafts, and to turn ferrules down to size.Specifications CE...
A130645-240V
CLUBMAKING
Golf Mechanix
The GolfMechanix Compact Shaft Cutter & Ferrule Prepping Center is the ideal tool for the small workshop and the occasional clubmaker. It...
Title
*